NASA's Dragonfly rotorcraft has completed its first simulated flight, but not on Titan: the test ran on testbeds at the Johns Hopkins Applied Physics Laboratory (APL) in Laurel, Maryland, where the vehicle is being integrated and tested. It was the most complete real-time test so far, using flight avionics and most of the systems and manoeuvres planned for arrival at Titan in 2034.

Psst!Add AlexTech.ai asPreferred Source on Google

In the simulation, the drone separates from its protective backshell, flies over sand dunes, finds a safe site, turns, descends and touches down for the first time on Saturn's largest moon. Every phase ran autonomously, with no commands from Earth.

official image of NASA’s Dragonfly Completes First Simulated Flight

Image: NASA — https://science.nasa.gov/mission/dragonfly/multimedia/

The test combined flight software and avionics with simulated data from the sensors Dragonfly will use on Titan: new navigation cameras, inertial measurement units and a lidar system. Lidar measures terrain altitude and slope and identifies hazards. The team generated the simulated terrain and, in real time, the images the cameras would capture; an emulator used graphics processors to render them with exposure times of 20 to 70 milliseconds, the same as in flight.

Running the full sequence on flight hardware let the team check how the components interact, including millisecond-scale delays as information moves between onboard processes. "These tests provide an important validation that everything works together," said Zach Putnam, mobility subsystem lead engineer at APL.

Next steps include running the first flight on the vehicle's actual flight system, testing other profiles and deliberately introducing faults to confirm Dragonfly can respond on its own. "On Titan, Dragonfly will have to fly without real-time help from Earth," Putnam said. "Everything we do there has to happen autonomously."

official image of NASA’s Dragonfly Completes First Simulated Flight

Image: turbosquid.com — https://www.turbosquid.com/3d-models/3d-nasa-dragonfly-rotorcraft-2296354

Before that first flight, the rotorcraft must be moved into position. Lockheed Martin engineers in Denver are testing the pose mechanism, which lowers it from its stowed position inside the backshell to the release point during descent. Static tests verified the structure can handle expected loads, while deployment tests measured smoothness, speed and locking, including with the hardware tilted to mimic swinging under the parachute.

The mission is scheduled to launch no earlier than 2028 for a six-year voyage to Titan. Once there, the vehicle will spend three years moving between sites to study chemistry, geology and atmosphere, aiming to advance understanding of life's chemical origins.