Burn-in, the permanent trace left by static images shown for too long, is the classic fear of anyone buying an OLED. A long-duration test by RTINGS has uncovered a different failure, unrelated to how the TV is watched: it is called «edge rot».
The finding comes from an accelerated ageing test lasting 18,000 hours, a load that RTINGS says corresponds to about ten years of use in an American home. Of 16 TVs with LG Display WOLED panels, 14 developed dead pixels or visible deterioration along the screen edges. Of three TVs with Samsung Display QD-OLED panels, none showed the problem.
The defects look like mould spreading along a wall: small clusters of dead pixels concentrated on the four sides and especially in the upper and side corners. Some are barely visible, others ruin the picture. Unlike burn-in, they do not depend on static content: changing programmes does not prevent the dead pixels from appearing. Researchers think the problem stems from panel design and manufacturing rather than from viewers' habits.
The most affected were first-generation WBC panels, where the defect appeared on nine TVs out of ten, judged serious in five cases. The newer WBE panels did better but were not immune: the problem emerged on five TVs out of six. Models involved include LG CX, C1, C2, G1 and G2, along with several Sony models. The 2023 LG G3, the only model from that year in the test, showed no dead pixels on the edges, although its panel burned in where a TV channel logo had stayed for a long time.
The causes are not yet confirmed. The most widely accepted hypothesis is that moisture seeps through protective layers at the panel margins, damaging the organic material that emits light. Samsung Display says its QD-OLED panels use Thin Film Encapsulation, which blocks this intrusion.
LG Electronics and LG Display acknowledge the phenomenon but attribute it to a small number of appliances exposed for long periods to high temperatures and humidity. They say they do not expect it to occur in normal home use and state they are working to improve panel design and manufacturing.
The test covers 2020-2023 models, so the results do not automatically apply to OLED TVs sold today. RTINGS is checking the longevity of panels made from 2024 onwards. Anyone evaluating a used or stock OLED should meanwhile check the edges too.
How to check your TV
The defect is hard to notice because LG TVs have a screen-shift function (Screen Move or Pixel Shift) that moves the image slightly and hides the outermost dots. To check, RTINGS recommends turning it off temporarily in the settings, displaying a solid-colour background (white, red or green) and looking closely at the edges and corners for rows or clusters of black dots.

No comments yet. Be the first!